Baby's Bottom Line - Diaper Accessories Snappi Prefolds

Snappi Diaper Fastener

Price: $3.95

3.74 USD

nappi's are a great alternative for parents who prefer a little extra hold but don't like using diaper pins. They work best with twill/gauze diapers such as prefolds, contoured or any other diapers would normally require pins. They do not work well with tightly woven diapers such as flannel diapers.

The stretchy plastic gripper teeth grab and hold the diaper into place, making it easy to use without the worry of sticking the baby or yourself.

Extra hold without using diaper pins
Works best with twill/gauze diapers
Stretchy plastic grippers
Available in a variety of stylish colors

How to use directions

Snappis WORK BEST with Snappi terry cloth diapers, cotton prefolds (Chinese or DSQ), and other cloth diapers with a loose enough weave for the Snappi to hook into. They DO NOT work well with flannel or any other tightly woven diapers, even most hemp diapers.

WARNING:
1. ALWAYS use a cover when using a Snappi fastener on your baby's diaper.
2. Keep out of children's reach when not in use!
3. Do not use your Snappi for longer than 6 months.
4. Do not leave your Snappi lying in the sun as it is not UV resistant and can reduce the effectiveness of the Snappi.

CARE: Clean your Snappi in hot soapy water. Do not launder them with diapers in the washer as this may weaken the grip attachment.

CAUTION: Any tear in the Snappi can lead to separation of a piece, presenting a possible choking hazard. Do not cut your Snappi as this could create weak spots in your Snappi. Inspect your Snappi before each use and discontinue use immediately if there is any sign of cracking, tearing, breakage or wear of the teeth or any other parts.

Snappi Fastener Illustration

DIRECTIONS FOR USE:
Snappi fasteners need to be used correctly in order to work effectively.

1. STRETCH the Snappi fastener before its first use. The stretching triggers the 'memory' of the Snappi to return to its original size and in so doing, pulls the diaper together to the middle to allow for a snug fit. This is essential for the Snappi to work properly. This can be done by holding the Snappi in the center with one hand and close to the end of the leg with the other hand. Then s-t-r-e-t-c-h a few times (10 or so). As you do this you should feel how the material 'softens' or gets more elastic. Follow this stretching procedure with each leg. The Snappi is now ready to go!

2. Make sure that the Snappi is ATTACHED SECURELY. It is important that the Snappi 'leg' being attached be stretched across the diaper before hooking it into the diaper. So,

Hook Left,
Stretch ACROSS and Hook Right,
Stretch DOWN and Hook Center

In other words, the Snappi fastener should go from a 'T' shape to a 'Y' shape.

By following these instructions, the Snappi should be secure, the diaper will fit snugly and the baby should not be able to undo it. ALWAYS place a cover over the diaper and Snappi fastener.

The Snappi fastener is manufactured from FDA approved raw materials, a polyester based polyurethane which is degradable on aging through hydrolysis and/or microbiological attack. It contains NO latex or any other adulterant, dilutent or modifying polymers. The composition is 100% polyurethane. It is made in South Africa.

When the Snappi fastener is not in use, fold the thin strip at the end of each leg to the back of the Snappi, and slip over the teeth of the white grip. This acts as a barrier and prevents the sharp teeth from being exposed.

NOTE: Keep all Snappi fasteners out of children's reach when not in use.

snappi:

QTY:

Click here to tell a friend about this product!

Additional Views

How to use directions

Recently Viewed